HENGXIN CHEMICAL
INDUSTRY CO., LTD | |
|
|
 |
|
   
     |
|
Thread Locker
ThreadLocking
Anaerobic adhesive |
|
HX
anaerobic threadlocking and sealants become
thermosetting plastics with different strengths after
curing, prevent loosening from shock and vibration, and
stop rust and corrosion of threaded metal fasteners. HX
offers removable to permanent thread sizes and
conditions.
|
 |
|
Speciality |
|
-
Single component without any solvent, cure on room temperature.
-
Totally fill in the thread gap.
-
Controlled lubricity for accurate clamp loads.
-
Wide
acceptance in a range of applications cater into
different lock strength.
-
Parts can be separated by hand tools, easy to eliminate.
|
 |
|
 |
 |
|
HX242 Threadlocking -
Medium Strength
-
General
purpose, Medium strength thixotropic viscosity, disassembly
with hand tools.
-
Used
for locking and sealing of under M20 thread corrosion
resistant.
-
Typical
application: locking of thread.
|
HX271
Threadlocking
–
High Strength
-
High
strength medium viscosity
-
Used
for permanent locking and sealing of under M36 thread
fasteners, corrosion resistant.
-
Typical
application: Locking of studs such as cylinder liner studs.
|
|
HX243
Threadlocking -
Oil Tolerant / Medium Strength
|
HX277
Threadlocking
–
Ultrahigh Strength
-
Superior
high strength, high viscosity, good chemical resistant,
permanent locking, disassemble at heated.
-
Used
for locking and sealing of under M36 thread fasteners,
corrosion resistant.
-
Typical
application: Removable with heat and hand tools.
|
|
HX268
Threadlocking
–
High Strength
-
High
strength medium viscosity,
-
Used
for locking and sealing of under M36 valve, corrosion
resistant.
-
Typical
application: locking and sealing larger valves.
|
HX290
Threadlocking
–
Wicking Grade
-
Medium
strength low viscosity threadlocking for pre-assembles bolts
up to M10.
-
Penetrate
threads by capillary action.
-
Secure
set screws and other assemblies after setting are completed
-
Typical
application: Seals welds and porous metal parts, protects
threads from rust and corrosion.
|
|
Product No. |
Color |
Viscosity
(mpa. s) |
Fixture Time
(min) |
Full Cure Time
(h) |
Torque
Prevail
(N.m) |
Torque
Break
(N.m) |
Gap Fill(mm) |
Temperature Range
(oC) |
Thixotropic |
|
HX242 |
Blue |
800-3000 |
15 |
24 |
＞2 |
＞10 |
0.13 |
-55-150 |
Yes |
|
HX243 |
Blue |
1300-3000 |
7 |
24 |
＞2 |
＞15 |
0.13 |
-55-150 |
Yes |
|
HX268 |
Brown |
800-1500 |
15 |
24 |
＞20 |
＞20 |
0.13 |
-55-150 |
No |
|
HX271 |
Red |
400-800 |
20 |
24 |
＞20 |
＞20 |
0.13 |
-55-150 |
No |
|
HX277 |
Red |
4000-7000 |
20 |
24 |
＞15 |
＞20 |
0.25 |
-55-150 |
No |
|
HX290 |
Green |
10-30 |
15 |
24 |
＞2.5 |
＞17.5 |
0.05 |
-55-150 |
No |
|
Package: 50g / Bottle
Package: 250g / Bottle
Package: 1000g / Bottle |
Notes:
-
Viscosity value: The value can be changed by using
different testing measures an at differ ambit.
-
Cure
Speed: It will be affected by substrate, surface finish
and temperature.
-
Torque: Applied on M10 steel nuts & bolt free of grease,
after 24 h.
-
All
the above notes are suitable for date of the directions.
|
|
SEALANTS DEMANDED |
|
Sealants demanded for 1000 pieces (bolt and nut) each 5
thread |
|
Diameter |
M6 |
M8 |
M10 |
M12 |
M14 |
M16 |
M20 |
|
Manual Dispensing |
31g |
47g |
85g |
156g |
210g |
257g |
392g |
|
Automatic Dispensing |
18g |
34g |
54g |
105g |
130g |
140g |
246g |
|
|
|
|
|
|
|
