HENGXIN CHEMICAL
INDUSTRY CO., LTD | |
|
 |
|
   
     |
HX Series Anaerobic Adhesives
Thread Locker
Pipe Thread
Sealant
Retaining
Compound
HX series adhesives have got the SGS
certificate. some of products got the qualified water quality
testing report. HX series adhesives HX series
adhesives are widely apply to automobile, motorcycle,
machine, gas engine, rock oil, metallurgy, mine, building materials,
textile, aviation and spaceflight etc... |
Get Catalog
PDF File
Detail Information
1.16M
Download |
|
HOT SELL
INFORMATION
|
Thread
Locker |
|
HX
anaerobic thread locker and sealants become
thermosetting plastics with different strengths after
curing, prevent loosening from shock and vibration, and
stop rust and corrosion of threaded metal fasteners. HX
offers removable to permanent thread sizes and
conditions.
|
 |
|
Pipe Thread
Sealant |
|
HX anaerobic thread sealants seal and
secure metal pipes and fittings, hardening instantly to
prevent leakage and rust. When fully cured, they seal to
the burst strength of most piping systems. A good
replacement of traditional sealing twine, oil or belt.
|
 |
|
Retaining
Compound |
|
HX anaerobic retaining compound
sealants bond non - threaded, cylindrical metal
assemblies. Fill the inner voids in close - fitting
press fits, keyways, and splines. Mount bearing and
bushing, and make press fits even stronger.
|
 |
|
|
Product
No. |
Color |
Viscosity
(mpa.
s) |
Fixture
Time
(min) |
Full
Cure Time
(h) |
Torque
Prevail
(N.m) |
Torque
Break
(N.m) |
Shear
Strength
(Mpa) |
Temperature
Range
(oC) |
Thixotropic |
|
THREAD LOCKER |
|
HX242 |
Blue |
800-3000 |
15 |
24 |
＞2 |
＞10 |
|
-55-150 |
√ |
|
HX243 |
Blue |
1300-3000 |
7 |
24 |
＞2 |
＞15 |
|
-55-150 |
√ |
|
HX268 |
Brown |
800-1500 |
15 |
24 |
＞20 |
＞20 |
|
-55-150 |
|
|
HX271 |
Red |
400-800 |
20 |
24 |
＞20 |
＞20 |
|
-55-150 |
|
|
HX277 |
Red |
4000-7000 |
20 |
24 |
＞15 |
＞20 |
|
-55-150 |
|
|
HX290 |
Green |
10-30 |
15 |
24 |
＞2.5 |
＞17.5 |
|
-55-150 |
|
|
PIPE THREAD SEALANT |
|
HX186 |
Brown |
5000-9000 |
20 |
24 |
|
＞4 |
|
-55-150 |
|
|
RETAINING COMPOUND |
|
HX340 |
Brown |
100-300 |
7 |
24 |
＞25 |
|
＞14 |
-55-150 |
|
|
HX609 |
Green |
100-300 |
7 |
24 |
＞25 |
|
＞14 |
-55-150 |
|
|
HX638 |
Green |
1800-3300 |
20 |
24 |
|
|
＞15 |
-55-150 |
√ |
|
HX680 |
Green |
1500-3500 |
20 |
24 |
＞20 |
|
＞20 |
-55-150 |
√ |
|
|
Hints on
successful application of HENGXIN anaerobic
adhesives.
Surface preparation: A slightly rough surface
will give a much stronger bond. Abrade surfaces then
clean with acetone cleaner Note: some materials may
be affected (particularly plastics) by solvents.
Compatibility tests should be carried out before
use. Choose adhesive required either for permanent
or easily disassembled retention. Apply adhesive to
one surface, assemble and allow to cure (full cure
normally 24 hours).
Shelf Life - 18 months Stored @ +10C to +25C
keep in small bottle.
Toxicity: HENGXIN anaerobic adhesives are non
toxic. There are no problems when handled correctly.
Avoid excess contact with skin, ensure adequate
ventilation, wash hands thoroughly after contact
with adhesive, wear protective gloves and eye
protection.
Inactive materials: A few examples of
substrates where it is advisable to activate
surfaces with Loctite 7649 anaerobic activator, high
alloy steel, chrome-nickel steel, galvanised steel,
zinc plated, nickel plated and chrome plated
surfaces.
HENGXIN anaerobic adhesives are liquid materials
which cure to a solid state when air is excluded and
come into contact with metal. The rate of cure is
determined by temperature and the type of metal
being bonded. Excess material outside bond area will
remain liquid and can be easily wiped away. Various
metals produce different cure rates, ie copper and
brass will cure fast while high alloy steel and
plated steels cure at a slower rate. Tests should be
carried out to determine products are suitable for
particular applications.
HENGXIN anaerobic adhesives are manufactered to the
highest specifications. Products are constantly
upgraded utilising the latest available technology.
Packaging of products is monitored closely. It is
necessary that air be present in containers to
ensure anaerobic adhesives remain liquid.
Temperature range -60C to +150C unless otherwise
stated. HENGXIN anaerobic adhesives are available
in10ml, 50ml, 250ml bottles and 1Kg big bottle.
|
|
|
|
